Snow Leopard on your favourite virtual platform

-

I've been using computers for quite a while and one of the things I like is to play with them. Since Apple moved away from PowerPC processors to Intel x86 processors many people thought we will soon have OS X on our PC hardware. Being Apple a hardware company, they have few reasons to make that happen (or so they think and act upon).

A few attempts from small hardware manufacturers of offering hardware that allows the install of OS X have faced a lawsuit that more or less kicked them out of business.

Some other people just made that same thing just for fun. What they call hackintosh computers are PCs running OS X that has been install after a more or less "hide and seek" game with several DVDs.

You need determination and the right hardware to get it working. Many times, a software update prevents your system to boot up next time. As a challenge it might be fun, but there is no fun on discovering your work is buried inside a system you can no longer boot-up. So the use of this hackingtosh computers may not be recommended (some even claim it might be a breach of OS X EULA, which does not allow it to be installed on non-Apple hardware).

As we have several Apple computers at home, I do not have a big incentive on running OS X on a PC, but I've always found it an interesting proposal. I've tried to install it on several old computers without luck. But yesterday I tried this simple steps to get it working on VMPlayer and it seems to work nicely (once I managed to change the locale to Spanish/English instead of the original Russian of the virtual machine image).

Comments

Post a Comment

Popular posts from this blog

VFD control with Arduino using RS485 link

-
Image
Variable Frequency Drives ( VFD ) allow the control of spindles so speed can accurately be controlled and a detailed acceleration profile for the spindle and reverse rotation can all be handled. In essence a VFD is an three phase inverter for three-phase AC motor. I am using a popular (I mean cheap) Chinese VFD and though the reference manual is not great, I could see there is a built-in RS-485 port. I usually control the start, stop and speed selection using the keyboard on the unit but I thought it will be more useful if I could control everything from the same Arduino is doing our CNC table control. Some cheap RS-485 off eBay and some lines of code later, I can start, stop and change the speed from an Arduino. What a cool thing to have! Some configuration of your VFD are needed before you can use it like that.  You need to set PD163=1 (I am using address 1 in the code). PD=164=1 (for setting serial to 9600bps) and PD165=0 (for using ASCII and 8N1 character format)
Read more

How to get sinusoidal s-curve for a stepper motor

-
Image
After some experimentation, and delving a bit into the math of motion, I realized there can be a significant difference on the motion of a machine by just making small changes. A common and popular approach to smooth one axis of motion is to use a trapezoidal speed pattern, where acceleration and deceleration are uniformly accelerated movements (aka constant acceleration motion) separated by a portion happening at cruising speed. The problem comes with the fact that, while that approach is simple to understand and to code, it does contain sudden changes in the acceleration, that show as spikes on the acceleration derivative, called jerk. These sudden changes in the acceleration translate into undesired vibration in our machines. Most of that can be eliminated by selecting a motion pattern that does not contain sudden changes of acceleration. If we chose a mathematical function for our speed whose second derivative is continuous, then we reduce system vibration quite a lot. One ma
Read more

Stepper motor step signal timing calculation

-
Image
While we use stepper motors in many devices, the timing of the step signals is not always well understood. Most of us can see how a fixed speed is a bad idea unless the speed of motion is really slow, but it is fixed speed what is really to generate with simple code. You just can use the Arduino Blink example to send a fixed frequency of pulses to a stepper motor driver. If too slow, just reduce the delay value. But for most real-life applications variable speed controls will perform better. These systems will speed up the motor to a given maximum speed and it will slow it down to stop at the desired step count. But understanding the math behind this process is sometimes not obvious. Let us start with the simple case of the so-called trapezoidal speed motion profile. Here motion takes place in three phases: acceleration, constant speed (cruising) and deceleration. But the point is how can our code create such a behavior. Stepper motor drivers usually accept two signals to control
Read more